Notice on the Revision of the Compulsory Certification Standard GB/T 14048.9-2024 for Control and Protection Switch-gear Products
Public Time:2024-12-24 Origin:CHINA QUALITY CERTIFICATION CENTRE CO.,LTD.

To All Concerned Enterprises,

GB/T 14048.9-2024 "Low-Voltage Switch-gear and Control-gear - Part 6-2: Multifunction Electrical Control and Protection Switch-gear (Equipment) (CPS)" (hereinafter referred to as the "New Standard") was published on May 28, 2024, and will be implemented on December 1, 2024, replacing GB/T 14048.9-2008 (hereinafter referred to as the "Old Standard"). The relevant requirements for CCC certification of control and protection switch-gear products under the New Standard are clarified as follows:

1. Implementation of the New Standard

Starting from December 1, 2024, CQC will implement certification according to the New Standard and issue certificates based on the New Standard. Certificates based on the Old Standard will no longer be issued.

2. Conversion of Old Standard Certification

For products certified under the Old Standard, the certificate holders must submit an application to CQC for the conversion to the New Standard certificate from the date of this announcement, and no later than before the first follow-up inspection after the implementation date of the new standard. If necessary, samples should be submitted for type test, and confirmation according to the New Standard should be completed. Upon passing, the New Standard certificate will be issued. All conversion work for Old Standard certificates must be completed by December 1, 2025. If not completed by then, CQC will suspend the Old Standard certificates. If the conversion is still not completed after March 1, 2026, CQC will revoke the Old Standard certificates.

3. Exceptions for Existing Products

For certified products that were manufactured and placed on the market before December 1, 2024, and are no longer in production, there is no need for certificate conversion.

4. Laboratory Reporting

Relevant designated laboratories should promptly report to CQC regarding their testing capabilities according to the New Standard and should timely submit records of their accreditation and recognition under the New Standard.

5. Consultation Contact Information

CQC can provide technical support for manufacturers and group clients regarding the conversion. For specific inquiries, please contact us via the following way:

Contact: Jia Yingwei

Tel: +86 1083886516

Contact: Mao Hailong

Tel: +86 1083886513

Contact: Shu Yali

Tel: +86 1083886027

Contact: Lang Jiancai

Tel: +86 1083886511

China Certification Centre

November 15, 2024


Introduction of Website / Exception Clause
Copyright by CHINA QUALITY CERTIFICATION CENTRE CO., LTD.