To those related enterprises:
In accordance with CNCA [2009] No. 189 notice “Notice of Requirements for Compulsory Certification of Some Low Voltage Apparatus”, arrangements for products that have obtained CCC certificates through CCEE, CCIB and license for the manufacturing of industrial products (these three certificates are referred to as “old system” hereinafter) are listed as follows:
I. In the process of this version change, for those CCC certificates obtained through the old system, testing items and correct testing results under the old system, which are consistent with the existing national standards, are admitted.
II. For those testing items and testing results that are different from the existing national standards or not included in the report under the old system, an additional test should be carried out in accordance with the existing national standards. Given that quite a lot of national standards for low voltage apparatus are changed intensively this year, and the great impact of the financial crisis to enterprises, therefore, in order to lighten the burden on enterprises, testing fees for some testing items (details are listed as below in Appendix 1 to 6) will not be charged and related expense costs will be jointly undertaken by CQC and the designated laboratory.
Contact Information:
Product Certification Department V
Mr. Yong ZHANG Tel: +8610-83886512
Mr. Jiancai LANG Tel: +8610-83886511
Fax: +8610-83886528
China Quality Certification Center
20 January 2010
Appendix
Appendix 1 Circuit Breaker with Electromagnetic Trip (GB14048.2)
No. |
Inspection Item |
Article |
1 |
Resistance to damp heat |
GB14048.1Appendix K |
2 |
Tripping characteristic and limit |
8.3.3.1 |
3 |
Mechanical operation and operating characteristic |
8.3.3.3 |
4 |
Overload capacity |
8.3.3.4 |
5 |
Resistance to electricity withstand capacity |
8.3.3.5 |
6 |
Temperature increase |
8.3.3.6 |
7 |
Validate overload release |
8.3.3.7 |
Appendix 2 Circuit Breaker with Electronic Trip (GB14048.2)
No. |
Inspection Item |
Article | |||
1 |
Resistance to damp heat |
GB14048.1 Appendix K |
| ||
2 |
Trip characteristic and limit |
8.3.3.1 |
| ||
3 |
Mechanical operation and operating characteristic |
8.3.3.3 |
| ||
4 |
Overload capacity |
8.3.3.4 |
| ||
5 |
Resistance to electricity withstand capacity |
8.3.3.5 |
| ||
6 |
Temperature increase |
8.3.3.6 |
| ||
7 |
Validate overload release |
8.3.3.7 |
| ||
Appendix 3 Residual Current Protective Circuit-breakers (GB14048.2)
No. |
Inspection Item |
Article | ||
1 |
Resistance to damp heat |
GB14048.1 Appendix K | ||
2 |
Dielectrical performance |
B8.3 | ||
3 |
Operate test device in ultimate value of rated voltage |
B8.4 | ||
4 |
Limit of non-operating current in over-current condition |
B8.5 | ||
5 |
CBR resistance to mistake tripping capacity in impulse voltage causing surge current condition |
B8.6.1 | ||
6 |
CBR operation status in earth fault include direct current component condition |
B8.7 | ||
7 |
Operation status in CBR online voltage fault condition classified by B3.1.2.1 |
B8.8 | ||
8 |
Operation status in CBR online voltage fault condition classified by B3.1.2.2.1 |
B8.9 | ||
9 |
Environment condition effect |
B8.11 | ||
Appendix 4 Switches, Disconnectors, and Switch-disconnectors(GB14048.3)
No. |
Inspection Item |
Article |
1 |
Resistance to damp heat |
GB14048.1Appendix K |
2 |
Connecting terminal mechanical capability |
8.2.4 |
3 |
Resistance to abnormal thermal and burning risk test |
GB14048.1 8.2.1.1 |
Appendix 5 Fuse-switch and Switch-fuse, Disconnector-fuse and Fuse-disconnector, Switch Disconnector Fuse and Fuse Switch Disconnector (GB14048.3)
No. |
Inspection Item |
Article |
1 |
Resistance to damp heat |
GB14048.1Appendix K |
2 |
Connecting terminal mechanical capability |
8.2.4 |
3 |
Resistance to abnormal thermal and burning risk test |
GB14048.1 8.2.1.1 |
Appendix 6 Electromechanical Control Circuit Device (GB14048.5)
No. |
Inspection Item |
Article |
1 |
Temperature rise |
8.3.33 |
2 |
Dielectrical performance |
8.3.3.4 |
3 |
Connecting terminal mechanical capability |
GB14048.1 8.2.4 |
4 |
Making and breaking capacity test of switching element under normal operation |
8.3.3.5.2 |
5 |
Measurement of electric clearance and creepage distance |
7.1.3 |
6 |
Certification of the limit of rotary switch |
8.2.6 |